Mfg
OEM Part Numer
GPS Part Number
Categories
Tags
$41.76
| Voltage | Amp/H | Length | Width | Height | Weight |
|---|---|---|---|---|---|
| N/A | N/A | N/A | N/A | N/A | N/A |
| Voltage | N/A |
| Amp/H | N/A |
| Length | N/A |
| Width | N/A |
| Height | N/A |
| Weight | N/A |
An integrated circuit monitors and controls both the output voltage and current of the charger through three separate charge states.
- A high current, fast charge state: battery charges at 2,000 mA fast charger current rate until the battery voltage reaches 14.6 volts.
- A topping charge state: battery charges at 14.6 volt constant voltage and current begins to taper until current is less than 500 mA.
- A precision float charge state: the charger changes to the float state and holds the battery voltage at 13.6 volts continuous. This allows the charger to remain connected to the batteries during periods of non-use, keeping the batteries in the state of full charge.
- Return to Bulk charge: should the battery voltage drop to 13 volts, the charger will return to the bulk charge stage.
The following safety features are internal to the Adventure Power 4A Charger/Maintainer.
- Short-circuit protection – protects the charger from short-circuit damage
- Over Current protection – protects the charger from over-current demand
- Over Voltage protection – protects the batteries from damage
- Battery Polarity Reversal – protects the charger and batteries against incorrectly installed batteries
- Low Battery Voltage – when the battery is 8V, the charger will not operate and the battery needs to be replaced
