Manufacturer
OEM Part Number
GPS Part Number
Categories
Tags
$116.00
| Voltage | WPC | AH/kVA | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|
| 1200 V | N/A | 200 A | N/A | N/A | N/A | 400 g |
| Voltage | 1200 V |
| WPC | N/A |
| Amp/H | 200 A |
| Length | N/A |
| Width | N/A |
| Height | N/A |
| Weight | 400 g |
The Mitsubishi Electric / Powerex CM200DY-24H is a high-power 1200 V, 200 A dual IGBT module containing two IGBTs arranged as a half-bridge. Each switching device incorporates a reverse-connected fast free-wheel diode, providing the current paths required for efficient operation with inductive loads in inverter, motor-drive and industrial power-conversion systems.
The dual-device configuration provides a complete inverter leg in a single insulated module, reducing external high-current interconnections while simplifying heatsink mounting and system assembly. Its 1200 V rating makes the CM200DY-24H particularly useful in higher-voltage DC-link systems where additional voltage headroom is required compared with 600 V IGBT modules.
This module is commonly suited to UPS inverter and rectifier stages, variable-frequency drives, industrial motor controls, welding equipment, power supplies and other high-current switching applications. For legacy equipment, the CM200DY-24H can also provide an important replacement option where the original Mitsubishi module must be matched for electrical characteristics, terminal arrangement and mechanical fit.
| Parameter | Value |
| Manufacturer | Mitsubishi Electric / Powerex |
| Part Number | CM200DY-24H |
| Device Type | Dual IGBT half-bridge with antiparallel fast diodes |
| Circuit Configuration | Dual / 2-pack half-bridge |
| Collector-Emitter Voltage (VCES) | 1200 V |
| Continuous Collector Current (IC) | 200 A @ TC=25 °C |
| Peak Collector Current | Approximately 400 A pulsed |
| Maximum Collector Dissipation | Approximately 850–900 W @ TC=25 °C |
| VCE(sat) | Approximately 2.1 V typical / 2.7 V maximum @ VGE=15 V, IC=200 A, 25 °C |
| Gate-Emitter Voltage (VGES) | ±20 V maximum |
| Gate Threshold Voltage (VGE(th)) | Approximately 5–7 V; approximately 6 V typical |
| Input Capacitance (Cies) | Approximately 35–45 nF |
| Output Capacitance (Coes) | Approximately 2.5–3.5 nF |
| Reverse Transfer Capacitance (Cres) | Approximately 1.5–2.0 nF |
| Total Gate Charge (QG) | Approximately 1200–1800 nC, dependent on operating conditions |
| Free-Wheel Diode Forward Voltage | Approximately 2.2–2.8 V @ 200 A |
| Diode Reverse-Recovery Time | Approximately 0.25–0.35 µs |
| IGBT Thermal Resistance RthJC | Approximately 0.12–0.15 °C/W per IGBT |
| Diode Thermal Resistance RthJC | Approximately 0.18–0.20 °C/W per diode |
| Isolation Test Voltage | 2.5 kV RMS / 1 minute, terminals-to-baseplate |
| Operating Junction Temperature | −40 °C to +150 °C |
| Storage Temperature | −40 °C to +125 °C |
| Approximate Dimensions | 108 × 62 × 30 mm |
| Approximate Weight | Approximately 400 g |
| Terminal / Mounting Torque | Approximately 4.5 N·m (40 in-lb) for M6 hardware |
| Baseplate | Electrically isolated metal baseplate |
| Configuration | Dual IGBT half-bridge |
| Condition | Reclaimed Part |
| Module | Representative Applications | Replacement Notes |
| CM200DY-24H | UPS inverter/rectifier bridges; variable-frequency drives; industrial motor controls; welding equipment; high-power converters; industrial power supplies | Confirm the complete CM200DY-24H part number, 1200 V rating, terminal arrangement, gate-drive requirements, mechanical footprint and thermal requirements before substitution. |
