Manufacturer
OEM Part Number
GPS Part Number
Categories
$4.50
| Voltage | WPC | AH/kVA | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|
| N/A | N/A | N/A | N/A | N/A | N/A | 1 |
| Voltage | N/A |
| WPC | N/A |
| Amp/H | N/A |
| Length | N/A |
| Width | N/A |
| Height | N/A |
| Weight | 1 |
The Tesla Powerwall 3 Spare Fascia Screw Kit (1857363-02-B) provides replacement fasteners for securing the Powerwall 3 glass front cover. It is suitable for replacing missing or damaged screws during installation or service.
The kit contains eight M6 × 17 mm fasteners. A Powerwall 3 front cover uses six screws, leaving two additional fasteners available as spares. The glass front cover and other installation hardware are sold separately.
| Category | Detail |
|---|---|
| Product Name | Powerwall 3 Spare Fascia Screw Kit |
| Part Number | 1857363-02-B |
| Application | Tesla Powerwall 3 glass front cover fastening |
| Fastener Size | M6 × 17 mm |
| Drive Type | Torx T20 |
| Kit Quantity | 8 screws |
| Required per Front Cover | 6 screws: 2 upper and 4 side fasteners |
| Product Scope | Replacement screws only |
Follow Tesla’s Powerwall 3 front cover installation procedure, including correct cover alignment and gasket compression. Tesla specifies approximately 25 in-lb (2.8 N·m) for these fasteners. Use a T20 driver; do not use an impact driver. These screws are intended for the fascia and are not wall-mounting anchors.
