Manufacturer
OEM Part Number
GPS Part Number
Categories
$97.50
| Voltage | WPC | AH/kVA | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|
| N/A | N/A | N/A | N/A | N/A | N/A | .5 |
| Voltage | N/A |
| WPC | N/A |
| Amp/H | N/A |
| Length | N/A |
| Width | N/A |
| Height | N/A |
| Weight | .5 |
The Tesla Powerwall 3 Accessory Kit brings together the fasteners, MPPT jumpers, cable management components, and ferrite cores used when installing or servicing compatible Powerwall 3 units.
Part number 1857363-00-J is the accessory bag specified for Powerwall 3 model families 1707000-11-L and higher and 1707000-21-L and higher. Matching the accessory kit to the Powerwall hardware revision ensures the correct components are selected.
Suitable as an additional or replacement accessory kit for supported installations. The Powerwall battery, glass front cover, wall mounting bracket, and site-specific installation materials are sold separately.
| Category | Detail |
|---|---|
| Product Name | Tesla Powerwall 3 Accessory Kit / Accessory Bag |
| Part Number | 1857363-00-J |
| Compatible Powerwall Models | 1707000-11-L and higher; 1707000-21-L and higher |
| Front Cover Fasteners | 8 — Tesla P/N 1847553-00-A |
| MPPT Jumpers | 3 — Tesla 2009322-series |
| Cable Management | 2 cable tie mounts with 2 cable ties for grouping conductors |
| Low-Voltage Ferrite Core | 1 small clamp-on core for the Tesla Asset Controller (TACO) harness |
| AC Ferrite Core | 1 large clamp-on core with 1 securing cable tie |
Confirm the complete Powerwall part number before ordering. Earlier Powerwall 3 revisions use different accessory kits, and Tesla specifies that the MPPT jumper types are not interchangeable. Install components according to the instructions for the matching Powerwall revision, including ferrite placement, conductor routing, and front cover fastening.
