Manufacturer
OEM Part Number
GPS Part Number
Categories
Tags
$198.54
| Voltage | WPC | AH/kVA | Length | Width | Height | Weight |
|---|---|---|---|---|---|---|
| N/A | N/A | N/A | 5.95 | 4 | 1 | .5 lbs |
| Voltage | N/A |
| WPC | N/A |
| Amp/H | N/A |
| Length | 5.95 |
| Width | 4 |
| Height | 1 |
| Weight | .5 lbs |
The APC AP9617 Network Management Card EX adds network-based monitoring and management to compatible legacy APC UPS systems. Review UPS status and alarms through its web interface or connect supported equipment to your existing SNMP monitoring platform.
This tested first-generation Network Management Card (NMC1) is a replacement option for supported older installations. Confirm your UPS model, application firmware, and network-security requirements before ordering.
The AP9617 is not a universal APC network card. Compatible equipment includes select older Smart-UPS SU, SUA, SUM, SURT, SURTA, and SURTD models, plus supported Symmetra and Matrix systems, subject to model and firmware requirements. It is not supported in Smart-UPS SMT, SMX, or SRT families. A matching SmartSlot opening alone does not confirm compatibility.
| Technical Specifications | AP9617 |
|---|---|
| Manufacturer | APC / Schneider Electric |
| Model / Part Number | AP9617 |
| Product Type | Network Management Card EX — first-generation NMC1 |
| Condition | Tested |
| Network Connection | RJ45 Ethernet, 10/100 Mbps |
| Management Access | Web interface, SNMP, and control console |
| IP Configuration | Static IP, DHCP, or BOOTP; see DHCP setup note below |
| Logging | Event log and data log |
| UPS Interface | APC SmartSlot in supported legacy equipment |
| Firmware Requirement | Application firmware must match the supported UPS family |
| Product Status | Legacy / discontinued model |
For consistent monitoring, use a documented static IP or a properly configured DHCP reservation. Record the card’s network settings and monitoring configuration for future service.
DHCP setup note: NMC1 cards require an APC vendor cookie in DHCP Option 43 by default. A DHCP reservation alone may not be sufficient unless the server supplies the required option or the card’s cookie requirement has been disabled.
The AP9617 is a discontinued legacy platform. Its older HTTPS implementation may not work with modern browser security requirements. Deploy it on a restricted management network, change default credentials, and limit access to authorized personnel. Do not expose the card directly to the public internet.
Please provide the UPS brand and full model number when ordering. A clear photo of the UPS identification label is also helpful. This allows us to verify compatibility and determine the appropriate application firmware for your UPS family.
Network preconfiguration: Request this before shipment so available options and required IP settings can be confirmed. Otherwise, your technician or IT staff will need to complete site-specific network setup after installation.
Order processing note: Missing UPS information may delay processing while we contact you to confirm compatibility. Installation should follow the applicable APC instructions for the UPS and management card.
